This is a Universal Big Three Upgrade Kit made of 1/0 AWG  Copper EB FLEX welding cable, some flex loom, and tinned copper ring terminals. 
This is for those who do not know how long the wires need to be. You will buy this kit and then cut the wires to the correct length during your install.
The ground wire will be 5' long, with a ring terminal at each end. You will cut this wire somewhere in between the ring terminals to get your two ground wires at the proper length needed for your install. 
The power wire is also 5' long and you may choose your color of cable and or flex loom for this wire: Blue cable with no flex loom, Blue/Black flex loom, Red/Black flex loom, Green/Black flex loom, Neon Green flex loom, Rasta flex loom. I will install the loom, heatshrink, and crimp ONE end of this wire.
This leaves you with two cables, cut the ground somewhere in the middle down to your desired length and now you have 3 cables, each with one uncrimped end that you will cut to the proper length and terminate as needed. 
I also include some premium zip ties with these kits to help you complete your install. Please make sure to keep the cables zip tied up off of the engine which can get very hot.

**It is recommended to use the Temco TH1818 Dieless hydraulic crimper for the ring terminals here. That is the best and easiest crimper to use. https://amzn.to/34Y3pI7

I also sell battery terminals and fuse holders, feel free to add them to your cart if you need these to complete your install! 

Also have fuse holders and circuit breakers if you need those as well.